Hummer Key Programming
Good news for Hummer owners: the H2 uses GM’s onboard system, so the transponder key and the keyless remote both program yourself with no tools — instant with a working key, or a ~30-minute relearn if you’ve lost them all. Find your model below.
Find your Hummer model
Tap your model, then match your key to the photo. Each picture links to that exact key if you need a replacement.
Hummer H2
2008–2009 · Transponder Chip Key Do it yourself
GM transponder you can program yourself with a working key (or the ~30-minute relearn if you have none). No tools. Steps below.
2008–2009 · Keyless Remote Do it yourself
Standalone keyless-entry remote — program the buttons yourself onboard, no tools. Steps below.
Program it yourself
GM’s onboard relearn — no tools, no dealer. Use the quick add-a-key if you have a working key; otherwise the ~30-minute relearn.
- Have a working key? Insert it, turn to ON (don’t start) for ~5 seconds, turn OFF and remove. Within 10 seconds insert the new key and turn to ON — the security light goes out and it’s learned.
- All keys lost (~30 min): insert the new key, turn to ON (don’t start). Wait 10 minutes until the security light turns off.
- Turn OFF, then back to ON within 5 seconds. Wait another 10 minutes for the light to go out. Repeat once more (third 10-minute cycle).
- Turn OFF — the key is now programmed to start the car.
- Remote buttons: with all doors closed, hold LOCK and UNLOCK together until the locks cycle, then test. Message us your year for the exact remote sequence.
Exact timing varies by year — message us your vehicle and we’ll send the precise sequence.
Need your Hummer key?
Find your exact match and we’ll ship it fast, ready to program.